YAMAHA R1 Race Seat 2015-2019
In stock and ready to ship!
While every effort is made to ship on the same day we do promise between 'same day' and 48 hour handling time excluding weekends and public holidays.
Guarantee Safe Checkout
YAMAHA R1 Race Seat 2015-2019
Race Foam Seat Pad - Suits YAMAHA R1 2015-2019
Our pre-cut Race Seat Foams are 100% brand new and they are the easy and simple solution to padding up your race tail. Forget buying expensive pieces of foam and then cutting to shape and gluing. Our pre-cut self-adhesive seat foams take all the work out of making a seat for your race tail and leave you with a good-looking, simple, and functional seat that takes only minutes to fit.
Features:
1 Piece, Black, Premium quality motorcycle race foam seat.
Fitting Instructions:
Before fitting the foam make sure that the area that you intend to stick it to is clean and free from contaminants such as oil and grease. We do not advise fitting the seat foam to the tail until it has been painted, glue from the foam can be very hard to remove if you intend to paint at a later date. The Seat Foam comes with a peel-off sticky side that you can use to attach it to the tail. It is important to note that the glue on the foam must be activated with a heat gun or hair dryer for it to adhere correctly to the tail.
Peel away the protective paper then use a heat gun or hair dryer to warm the surface of the tail and the glue on the seat foam. You need to get the glue quite warm but not so hot that you burn the foam or the tail. Once you have it warm enough place the seat foam in position and get someone to help you apply pressure to the foam while you tape it in position. Place some clean rags over the seat foam first so that the tape does not mark it. Make sure the tape you use is strong enough to hold the foam firmly to the tail and allow it to cure overnight or for at least 12 hours.
If you find that for whatever reason the foam will not stick, such as around a tight radius near the edge, then you may need to use additional glue to hold it in place. Also, some bikes have under-seat mufflers that can get very hot and melt the glue on the seat foam. If you think you will have this problem then you may need to use extra adhesive. We recommend Bostik Contact Bond - it's a good contact adhesive that will not melt/separate under excessively hot conditions. It's available from most hardware stores.
New softer formula seat foam
- More flexible
- Easier to fit, especially around tight radius bends
- More comfortable
- Looks like a professional-looking finish
Bostik Contact Bond that will be less affected by the heat of the exhaust The self-adhesive layer on our seat foams is heat activated and may not remain sticky under excessively hot conditions. If you intend on using our seat foam on a bike that has an under-tail exhaust that causes excessive heat we advise using some heat shield on the underside of the tail, if this is not effective it is also possible to glue the seat foam on using a contact adhesive such as
Refund Policy of MOTO RIDENOW PTY LTD
This Refund Policy ("Policy") applies to the following purchases:
https://www.motoridenow.com.au/
1 . General
(a) We offer refunds , repairs and replacements in accordance with the Australian Consumer Law and on the terms set out in this Refund Policy ("Policy").
(b) Any benefits set out in this Policy may apply in addition to consumer's rights under the Australian Consumer Law.
(c) Before making a purchase , please read this Policy so that you can understand your rights and what you can expect from us if you are not satisfied with your order.
2 . Australian Consumer Law
(a) Under the Australian Consumer Law:
(i) Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled
(A) to cancel your service contract with us; and
(B) to a refund for the unused portion, or to compensation for its reduced value.
(ii) You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
(b) We offer refunds , repairs , and replacements in accordance with the Australian Consumer Law.
(c) The Australian Consumer Law provides a set of Consumer Guarantees which protect consumers when they buy products and services.
(d) If the Australian Consumer Law applies , then we cannot avoid the Consumer Guarantees which it provides . If there is an inconsistency between this Policy and the Australian Consumer Law, the Australian Consumer Law will prevail.
(e) Further information about the Australian Consumer Law and these Consumer Guarantees is available from the website of the Australian Competition and Consumer Commission.
(f) If a product or service which you purchased from us has a major failure (as defined in the Australian Consumer Law) then you may be entitled to a replacement or refund . You may also be entitled to compensation for any reasonably foreseeable loss or damage resulting from that major failure.
(g) If a product or service which you purchased from us has a failure which does not amount to a major failure (as defined in the Australian Consumer Law) then you may still be entitled to have the goods repaired or replaced.
3 . Cancellation and Change of Mind
(a) In the event that you receive the products or services you have purchased , as stated , but that you simply change your mind , we may, at our discretion , offer you a refund or exchange , provided that:
(i) You notify us within 7 days of receipt.
(ii) In the case of services , the services have not already been performed.
(iii) The following conditions are satisfied:
a) Product has not been used in new condition.
b) Product has not been damaged and with original tags on.
c) Product must be returned with original receipt.
d) Unless required by the provisions of the Australian Consumer Law, electrical goods, helmets, gloves, boots are non-returnable or exchangeable.
e) Unless required by the provisions of the Australian Consumer Law, special orders (eg, exhaust, parts) and back orders are not cancellable.
f) The Purchaser is liable for freight and insurance. In the case of non-faulty returns, a 15% restocking, processing, and inspection fee may apply to the value of the product.
4 . Products Damaged During Delivery
(a) In the event that the product you ordered has been damaged during delivery:
(i) Please contact us as soon as possible.
(ii) Any damaged product must be returned in the condition in which it was received , together with any packaging and other items which you received with the damaged product.
(b) We will arrange to repair or collect the damaged product and replace it with an equivalent product , or to refund it , provided that you have contacted us within 7 days from the date of receiving the product.
5 . Exceptions
(a) Notwithstanding the other provisions of this Policy, we may refuse to provide a repair, replacement or refund for a product or service purchased by you if:
(i) You misused the said product in a way which caused the problem.
(ii) You knew or were made aware of the problem(s) with the product or service before you purchased it.
(iii) You asked for a service to be done in a certain manner, or you asked for alterations to a product , against our advice , or you were unclear about what you wanted.
(iv) Any other exceptions that apply under the Australian Consumer Law.
6 . Shipping Costs for Returns
(a) In the event that a product you have purchased fails to meet one or more Consumer Guarantees under the Australian Consumer Law, we shall bear any cost of shipping the said product (the "Returned Product") back to us , as well as any cost of shipping any replacement product to you.
(b) If the Returned Product can easily be shipped or returned , then you are responsible for organising for the Returned Product to be returned to us. If the Returned Product is eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) then we will reimburse you for the reasonable postage , shipping or transportation costs for the Returned Product.
(c) If the Returned Product is too large , too heavy, or otherwise too difficult to be removed and returned by you , and is believed to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then we will organise for the postage , shipping , transportation or collection of the Returned Product , at our cost.
(d) In the event that we organise and pay for the inspection , postage , shipping , transportation or collection of a Returned Product , and it turns out not to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then you will be required to pay the costs of any inspection , postage , shipping , transportation or collection of the Returned Product.
7 . Response Time
(a) We aim to process any requests for repairs , replacements or refunds within 5 days of receipt.
8 . How to Return Products
(a)You can contact us at the end of this Policy to discuss a return using the
information.
(b) Unless otherwise defined in our sole discretion , we shall pay all refunds in the same form as the original purchase or to the same account or credit card used to make the original purchase.
(c) To be eligible for a refund , repair or replacement , you must provide proof of purchase.
(d) You may be required to provide a government issued identification to qualify for a refund , repair or replacement.
9 . Contact Us
(a) If you wish to speak to us about this Policy or about any refund , repairs or replacements , please contact us at: motoridenow@outlook.com.